1. Attach bracket-fig.1 to 4th hole
from front of rack-fig.6 using BSHW0012-fig.2 screws and BSHW0011-fig.4 washer.Secure with blue loctite.

2. Remove QR and reinstall with ends of bracket in place.

3. Install Adapter plate-fig.5 to each dropout at aft side using BSHWOO12-fig.2 screw. Secure with blue loctite. (Adapter plate optional if not using fenders.)

4. Bolt rack legs to front hole with BSHW0020-fig.3 screw and (BSHW0011-fig.4 washer on each side

If rack is not level adjust using holes in rack angles.