Note: Older bikes with the 1/2" or  5/8" sprint braces will need to use the smaller clamps and extra hardware enclosed. V3 Steel and Stratus XP with disk brakes use BPAC0076 rack adapter bars and BPAC0077 rack adapter plates. sold here

Parts List    Qty BoltM5x12      2 Bolt M5x25      2 Washer      4 3/4" clamp      2 Black washers      8 5mm nut      2

   1.  Remove the seat assembly from the bike.
   2.  Slide Rack over the sprint braces. 

 3. Attach the rack to the bottom dropouts using 5mm x12 bolt & (2)    washers.

 4. Slip clamp onto the sprint braces. Using the 5mm x25 bolt & (4) of the black washers, fasten to the corresponding holes on  the rack. Tighten with the 5mm nut.